LKT 130

The concept of the LKT 130 forest wheel tractor retains the tried-and-tested classic layout of the LKT 81 ITL with all-wheel drive of the same size and a pivoting frame. The tractor is controlled by articulation of two hydraulic cylinders. Bending the frame around the vertical pins is possible up to 43 °.

More

The chassis designed in this way in conjunction with the power unit, which is composed of a 129 kW engine, with a hydrodynamic transmission with shifting under load, a mechanical single-stage transmission and the possibility of blocking the hydrodynamic converter allows excellent maneuverability and driving in very complicated terrain. LKT 130 ITL is designed for pulling the logs from the stand by the method of collecting rope. It has an ideally dimensioned double-drum winch with a pulling force of 80 kN or, optional 100 kN. After pulling the logs to the tractor, they are transported by towing in a semi-hanging. The front blade is specially designed for ramping logs and can also be used for simple earthworks.

Main benefits

Safety cabine with modern design provides the operator higher comfort, allows better view on working place and better material handling
Two hydraulic articulation cylinders extend the service life, improve the stability of the machine and its strength
Gearbox with hydrodynamic converter provides precise and comfortable shifting under load (without clutch and stopping)
Optional remote control for driving and steering simplifies the operation of the tractor and increase safety work

Engine

Engine
Engine	CUMMINS, B 4,5, 129 kW, STG V
Type	diesel, 4-stroke with turbocharger
Fuel tank	140 l

Steering
Type	hydraulic servo steering, articulation of half frames by means of 2 (two) hydraulic pistons
Control	steering wheel with emergency steering

Transmission

Transmission
Type	hydrodynamic, shifting under load
Gearbox	mechanical, 2-gears, work/travel modes
Forward gears	12
Reverse gears	8 hydrodynamic convertor blocking
Max speed	34 km/h

Axles
Producer
Differential	disc differential locking – electro-hydraulicaly operated
Service brakes	disc operation brakes with brake valves
Parking brake	electro-hydraulic
Front axle	fixed
Rear axle	fixed

Tires
Size	540/70-30

Standard equipment

Cab
Certification	ROPS, FOPS, OPS
Seat	heated with air suspension and mechanical turntable

Winch
Type	electro-hydraulicaly operated,double drum, free unwinching of the rope
Drive	hydromotor
Winch power	80 kN
Winching speed	0,8 – 1,2 m/s. max
Rope – diameter/length	12 mm/90 m or 13 mm/75 m

Front blade

Rear shield
tiltable, hydraulicaly operated with high pedestal, guiding rollers

Frames
pivoting of the frames through axial bearing with hydraulic locking

Hydraulic work pump
displacement 75 cm3/rev

Hydraulic tank
110 l

Hydraulic working pressure
240 bar

Electrical system
Voltage	24 V
Alternator	70A/28V
Baterries	12V/50Ah, 2 ks
Starter	4 kW/24V

Weight
9 800 kg

Dimensions
DxŠxV: 6.710 x 2.550 x 3.103 mm

Optional equipment

Options
Winch 2х90 kN, double drum with free unwinching of the rope, electro-hydraulically operated, winding speed: 08 – 1,2m/s, rope diameter/ lenght: 12mm/90m or 13 mm/ 75m 2х100 kN, double drum with free unwinching of the rope, electro-hydraulically operated,two-speed, rope diameter/ lenght: 12mm/140m or 13 mm/ 120m 2х120 kN, double drum with free unwinching of the rope, electro-hydraulically operated,two-speed, rope diameter/ lenght: 12mm/140m or 13 mm/ 120m

Rear shield (version without hydraulic crane) tiltable, low pedestal, with guiding rollers and protection arcs tiltable, low pedestal, with spherical guiding rollers tiltable, independent moving frame with spherical guiding rollers
Front blade front blade with hydraulic pliers for gripping logs and assortments during timber handling, electrically operated joystick tool boxes on the front blade – storage boxes – 2 pcs

Tires incl. rims 23,1-26 or 28L-26
Remote control start – stop system, travel control of machine, winches, rear shield and throttle regulation
Cabin rotating workstation – seat BE-GE 31 heated with air suspension, mechanical swivelling, armrests (right, left) and joysticks, pedals on rotating workstation rotating workstation – seat BE-GE 31 heated with air suspension, electric brake, mechanical swivelling, armrests (right, left) and joysticks, pedals on rotating workstation pretictive seatcovers (LKT) mechanical swiveling air-condition Eberschpecher with independent cooler and ventilator radio with CD and USB port cab protection with protective iron grid rear window 1x front side window 2x upper rear side window 1x lower rear side window 1x upper part of door 2x lower part of door 2x side working LED lighting (2×2) engine preheating (heating of circulating cooling system))
Others coupling for trailer – 14t hydraulic coupler – hydraulic quick couplings (for powering of attachments as: milling cutters, mulchers, drive and braking of the trailer) fuel flow meter hydraulic oil – BIO oil instead of mineral oil

Options

Winch

2х90 kN, double drum with free unwinching of the rope, electro-hydraulically operated, winding speed: 08 – 1,2m/s, rope diameter/ lenght: 12mm/90m or 13 mm/ 75m
2х100 kN, double drum with free unwinching of the rope, electro-hydraulically operated,two-speed, rope diameter/ lenght: 12mm/140m or 13 mm/ 120m
2х120 kN, double drum with free unwinching of the rope, electro-hydraulically operated,two-speed, rope diameter/ lenght: 12mm/140m or 13 mm/ 120m

Rear shield (version without hydraulic crane)

tiltable, low pedestal, with guiding rollers and protection arcs
tiltable, low pedestal, with spherical guiding rollers
tiltable, independent moving frame with spherical guiding rollers

Front blade

front blade with hydraulic pliers for gripping logs and assortments during timber handling, electrically operated joystick
tool boxes on the front blade – storage boxes – 2 pcs

Tires incl. rims

23,1-26 or 28L-26

Remote control

start – stop system, travel control of machine, winches, rear shield and throttle regulation

Cabin

rotating workstation – seat BE-GE 31 heated with air suspension, mechanical swivelling, armrests (right, left) and joysticks, pedals on rotating workstation
rotating workstation – seat BE-GE 31 heated with air suspension, electric brake, mechanical swivelling, armrests (right, left) and joysticks, pedals on rotating workstation
pretictive seatcovers (LKT)
mechanical swiveling
air-condition Eberschpecher with independent cooler and ventilator
radio with CD and USB port
cab protection with protective iron grid
- rear window 1x
- front side window 2x
- upper rear side window 1x
- lower rear side window 1x
- upper part of door 2x
- lower part of door 2x
side working LED lighting (2×2)
engine preheating (heating of circulating cooling system))

Others

coupling for trailer – 14t
hydraulic coupler – hydraulic quick couplings (for powering of attachments as: milling cutters, mulchers, drive and braking of the trailer)
fuel flow meter
hydraulic oil – BIO oil instead of mineral oil

Attachments

Attachments for LKT 130
Trailers Type 1042 – with short shaft, for LKT with crane, payload 10 t, 4×4 drive Type 1042 – with short shaft, for LKT with crane, payload 10 t, 2×4 drive Type 1442 – with short shaft, for LKT with crane, payload 14 t, 4×4 drive Type 1442 – with short shaft, for LKT with crane, payload 14 t, 2×4 drive
Cutting heads Cutting head Nisula 175 E Cutting head Nisula 205 E Cutting head Nisula 285 E
Cutter single disc cutter TPF – 1N double disc cutter TPF – 2
Cutting heads Cutting head Nisula 175 E Cutting head Nisula 205 E Cutting head Nisula 285 E
Three point hitch three point hitch

Attachments for LKT 130

Trailers

Type 1042 – with short shaft, for LKT with crane, payload 10 t, 4×4 drive
Type 1042 – with short shaft, for LKT with crane, payload 10 t, 2×4 drive
Type 1442 – with short shaft, for LKT with crane, payload 14 t, 4×4 drive
Type 1442 – with short shaft, for LKT with crane, payload 14 t, 2×4 drive

Cutting heads

Cutting head Nisula 175 E
Cutting head Nisula 205 E
Cutting head Nisula 285 E

Cutter

single disc cutter TPF – 1N
double disc cutter TPF – 2

Cutting heads

Cutting head Nisula 175 E
Cutting head Nisula 205 E
Cutting head Nisula 285 E

Three point hitch

three point hitch

Download

Leaflet LKT 130

Technical information LKT 130 (Basic dimensions with Crane)

Technical information LKT 130 (Basic dimensions with Clambunk)

Technical information LKT 130 (Radius of frame breaks for 43° steering angle)

Main benefits

Safety cabine with modern design provides the operator higher comfort, allows better view on working place and better material handling
Two hydraulic articulation cylinders extend the service life, improve the stability of the machine and its strength
Gearbox with hydrodynamic converter provides precise and comfortable shifting under load (without clutch and stopping)
Optional remote control for driving and steering simplifies the operation of the tractor and increase safety work

Engine

Engine
Engine	CUMMINS, B 4,5, 129 kW, STG V
Type	diesel, 4-stroke with turbocharger
Fuel tank	140 l

Steering
Type	hydraulic servo steering, articulation of half frames by means of 2 (two) hydraulic pistons
Control	steering wheel with emergency steering

Transmission

Transmission
Type	hydrodynamic, shifting under load
Gearbox	mechanical, 2-gears, work/travel modes
Forward gears	12
Reverse gears	8 hydrodynamic convertor blocking
Max speed	34 km/h

Axles
Producer
Differential	disc differential locking – electro-hydraulicaly operated
Service brakes	disc operation brakes with brake valves
Parking brake	electro-hydraulic
Front axle	fixed
Rear axle	fixed

Tires
Size	540/70-30

Standard equipment

Cab
Certification	ROPS, FOPS, OPS
Seat	heated with air suspension and mechanical turntable

Winch
Type	electro-hydraulicaly operated,double drum, free unwinching of the rope
Drive	hydromotor
Winch power	80 kN
Winching speed	0,8 – 1,2 m/s. max
Rope – diameter/length	12 mm/90 m or 13 mm/75 m

Front blade

Rear shield
tiltable, hydraulicaly operated with high pedestal, guiding rollers

Frames
pivoting of the frames through axial bearing with hydraulic locking

Hydraulic work pump
displacement 75 cm3/rev

Hydraulic tank
110 l

Hydraulic working pressure
240 bar

Electrical system
Voltage	24 V
Alternator	70A/28V
Baterries	12V/50Ah, 2 ks
Starter	4 kW/24V

Weight
9 800 kg

Dimensions
DxŠxV: 6.710 x 2.550 x 3.103 mm

Optional equipment

Options
Winch 2х90 kN, double drum with free unwinching of the rope, electro-hydraulically operated, winding speed: 08 – 1,2m/s, rope diameter/ lenght: 12mm/90m or 13 mm/ 75m 2х100 kN, double drum with free unwinching of the rope, electro-hydraulically operated,two-speed, rope diameter/ lenght: 12mm/140m or 13 mm/ 120m 2х120 kN, double drum with free unwinching of the rope, electro-hydraulically operated,two-speed, rope diameter/ lenght: 12mm/140m or 13 mm/ 120m

Rear shield (version without hydraulic crane) tiltable, low pedestal with guiding rollers and protection arcs tiltable, low pedestal with spherical guiding rollers tiltable, independent moving frame with spherical guiding rollers
Front blade front blade with hydraulic pliers designed for gripping logs and assortments during timber handling tool boxes on the front blade – storage boxes – 2 pcs

Tires incl. rims 23,1-26 or 28L-26
Remote control start – stop system, travel control of machine, winches, rear shield and throttle regulation
Cabin air-condition with independent cooler and ventilator radio with CD and USB port, 2 speakers electric seat-swivel protective seatcovers (LKT) cab protection with protective iron grid rear window front side window 2x upper rear side window 1x lower rear side window 1x upper part of door 1x lower part of door 1x shaded rear window and rear side windows with increased abrasion resistance side working LED lighting (2×2) engine preheating (heating of circulating cooling system)
Others coupling for trailer – 14t electro-quick coupling with rear outlet (for drive of attachments, drive and breaking of trailer) fuel flow meter hydraulic fillers – BIO oil instead of mineral oil